Siemens SIMATIC ET 200X - Removing the Connector from the Shell

Wiring
4-16
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
Removing connectors
If you want to remove a connector, proceed as follows
1. Release the two locking hooks as illustrated in Figure 4-8 using a pointed
implement.
2. Remove the connector from the shell.
Release locking hooks
Remove the connector from the shell
1
2
1
1
2
2
1
1
Shell
Connector
Figure 4-8 Removing the connector from the shell