Siemens SIMATIC ET 200X - (6 Es7 148-1 Ca00-0 Xb0)

Technical Specifications
7-78
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
7.20 PM 148 DO 4 DC 24V/2A power module
(6ES7 148-1CA00-0XB0)
Hardware
The power module can be used together with the following basic modules:
 BM 141 DI 8DC 24V, 6ES7 141-1BF01-0XB0, from product version 05
6ES7 141-1BF11-0XB0, from product version 01
6ES7 141-1BF12-0XB0, from product version 01
 BM 141 DI 8DC 24V ECOFAST,
6ES7 141-1BF00-0AB0, from product version 01
6ES7 141-1BF01-0AB0, from product version 01
 BM 141 DI 8DC 24V ECOFAST DIAG,
6ES7 141-1BF40-0AB0, from product version 01
 BM 142 DO 4DC 24V/2A, 6ES7 142-1BD11-0XB0, from product version 05
6ES7 142-1BD21-0XB0, from product version 01
6ES7 142-1BD22-0XB0, from product version 01
 BM 143-DESINA FO, 6ES7 143-1BF00-0XB0, version 01 or later
 BM 143-DESINA RS485, 6ES7 143-1BF00-0AB0, version 01 or later
 BM 147/CPU, 6ES7 147-1AA00-0XB0, version 01 or later
Features
The PM 148 DO 4 x DC 24V/2A power module, order number
6ES7 148-1CA00-0XB0, has the following features:
 Connection for load voltage supply
 4 digital outputs
 Output current 2 A per output
 Rated load voltage 24 VDC
 Suitable for solenoids, DC contactors and indicator lights
 Parameterizable diagnostic interrupt
 Parameterizable diagnostics
 Parameterizable substitute value output
 Indicator for system fault (SF LED)
 Indicator for load voltage (DC 24V LED)