Order Numbers
A-9
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
Manual for the ET 200 in SIMATIC S5
You require the manual listed below to program and commission the ET 200X with
COM PROFIBUS.
Table A-10 Manual for ET 200 in SIMATIC S5
Manual Order number Contents
ET 200
distributed I/O
system
6ES5 998-3ES.2 Description of master interface IM 308-C for
S5-115U/H, S5-135U and S5-155U/H
Description of the S5-95U with the PROFIBUS-DP
master interface
Description of the procedure for installing a DP
system and an FMS system with the CP 5412 (A2)
as master
Handling COM PROFIBUS
Handling FB IM308C/FB 230
Technical guide to PROFIBUS-DP with SIMATIC S7 and STEP 7
Table A-11 Technical Guide to PROFIBUS-DP and SIMATIC S7
Technical guide Order number Contents
Decentralization with
PROFIBUS-DP
– Architecture and Fundamentals,
Configuration and Use with
SIMATIC S7 –
Josef Weigmann, Gerhard Kilian
Publicis MCD Verlag, 2nd Edition,
2000
In bookshops:
ISBN 3-89578-123-1
From your Siemens
agent:
A19100-L531-B772
Instruction manual for a
simple introduction to
PROFIBUS-DP and
implementation of
automation tasks with
PROFIBUS-DP and
SIMATIC S7.
Use of PROFIBUS-DP is
illustrated for the
SIMATIC-related examples.
To Next Page
Loading...
