Order Numbers
A-6
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
Connectors for AIs/AOs
To connect actuators/sensors to the analog inputs/outputs of the corresponding
expansion modules, use 4- or 5-pin M12 coupler plugs. We recommend the
following connectors from Binder.
Table A-5 Connectors manufactured by Binder – order numbers
Description Order number
Connector 4-pin Outgoing cable unit PG 7
Connector 4-pin Outgoing cable unit PG 9
Connector 5-pin Outgoing cable unit PG 7
Connector 5-pin Outgoing cable unit PG 9
99-1429-814-04
99-1429-812-04
99-1437-814-05
99-1437-812-05
Address for ordering:
Franz Binder GmbH + Co.-74172 Neckarsulm
To Next Page
Loading...
