Various Interface Signals (A2)
1.6 NC services
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
37
● 3: EXTFRAME = current external work offset
● 4: TOTFRAME = current total work offset = total of ACTFRAME and EXTFRAME
● 5: ACTBFRAME = current total base frame
● 6: SETFRAME = current 1st system frame (PRESET, scratching)
● 7: EXTSFRAME = current 2nd system frame (PRESET, scratching)
● 8: PARTFRAME = current 3rd system frame (TCARR and PAROT with orientable tool
carrier)
● 9: TOOLFRAME = current 4th system frame (TOROT and TOFRAME)
● 10: MEASFRAME = result frame for workpiece and tool gauging
● 11: WPFRAME = current 5th system frame (workpiece reference points)
● 12: CYCFRAME = current 6th system frame (cycles)
The max. frame index is 12.
The value of numMachAxes is contained in the variable with variable index 4.
Variable linShift [r]
VB120x1000 3
VB120x1001 -
VW120x1002 Frame index * numMachAxes + axis number
VW120x1004 -
VD120x1008 -
VD120x3004 Read: Data from NCK variable x (data type of the variables: REAL)
Variable numMachAxes
No. of the highest existing channel axis
If there are no gaps between channels, this corresponds to the number of existing axes in
the channel.
Variable numMachAxes [r]
VB120x1000 4
VB120x1001 -
VW120x1002 -
VW120x1004 -
VD120x1008 -
VW120x3004 Read: Data from NCK variable x (data type of the variables: WORD)
To Next Page
Loading...
