Siemens SINUMERIK 840D Simodrive 611 digital

11
03/2006
11.4 Data back-up via PG/PC
11-230
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
1. Connect the PG/PC
2. In the “Services” area of the HMI,
3. select “RS-232 PG/PC” interface (vertical soft key).
4. Select “Settings” and check or enter the parameter settings of the RS-232
interface (default setting).
Device type: RTS/CTS
Baud rate: 9600 Baud
Parity: no
Data bits: 8
Stop bits: 1
XON character: 11H(ex)
XOFF character: 13H(ex)
End of text character: 1AH(ex)
Format: – Punched tape format unchecked
for standard system start-up or for backing up
drive data by area (boot files)
– Punched tape format checked for backing up
all other data by area.
Operating
procedure
(data back-up)
11 Data Back-U
p