Siemens SINUMERIK 840D Simodrive 611 digital - Machine and Setting Data

6 Pro
g
rammin
g
the control
6
03/2006
6.1 Machine and setting data
6-51
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
The individual bits can be set or reset by clicking on them with the mouse.
Alternatively they can be selected using the cursor keys and then pressing the
Toggle key.
S Press the “OK” soft key to exit the bit editor and accept the set value.
S Press the “Cancel” soft key to exit the bit editor and reject the set value.
The previous setting is restored.