3
03/2006
3.8 PCU 20/50/50.3/70
3-34
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
3.8.2 Settings with HMI Embedded/HMI Advanced for
SINUMERIK 810D
For the SINUMERIK 810D, the MPI interface is set to 187.5 kBaud.
S PCU 20 with HMI Embedded
The PCU automatically adjusts to the baud rate.
S PCU 50/50.3/70 with HMI Advanced
The PCU must be set to a transmission speed of 187.5 kBaud in the
“Start-up/HMI/Operating panel” menu.
The display machine data (BTSS settings) are set via the user interface of the
HMI in the Start-up area “Start-up” –> “Machine data”.
S PCU 20 with HMI Embedded
The HMI Embedded software is available in six languages by default
(English, German, French, Italian, Spanish and simplified Chinese).
S PCU 50/50.3/70 with HMI Advanced
The PCU with HMI Advanced is always supplied as a multilingual version.
The default setting is English.
MD 9006: This MD is used to enter the time after which the screen saver mode
is activated if no key is pressed on the operating panel within the specified time.
The settings for 3 different devices are made via the HMI in an input box in the
“Services” menu.
A detailed description of the functions and parameter settings can be found in
the following documentation:
Reference material: /IAM/ Start-up Guide, IM2, HMI Embedded
IM4, HMI Advanced
J
Setting the MPI
interface
Setting the display
machine data
Language
Screen saver mode
3 Settin
s, MPI/BTSS
To Next Page
Loading...
