5
03/2006
5.4 Power-On and Power-Up
5-47
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
5.4.7 PCU/HMI Advanced BIOS setup
The default settings in the BIOS of the PCU/HMI Advanced can be displayed
directly on screen during power-up.
S Start the control
S At the prompt, press the BIOS setup key <F2> or horizontal soft key 2 on
the OP. The BIOS setup menu appears.
Note
The settings for the BIOS default parameters are described in the following
documentation:
Reference material: /IAM/ IM4, HMI Advanced Start-up Guide
/BH/ Device Manual, Operating Components
J
5 Power-On and Power-U
To Next Page
Loading...
