Siemens SINUMERIK 840D Simodrive 611 digital - Page 283

14
03/2006
14.2 Machine data access via part program
14-283
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
...
CHANDATA(2) Assignment for channel 2
$MC_CHAN_NAME=‘CHAN2‘ Channel name for channel 2
...
R10 = 96,88 R10 of channel 2
...
J
14 Miscellaneous