A
03/2006
A-288
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
Interface signal
Zero shift
Organizational block in the PLC
Operator Panel Interface
I/O bus
Personal Computer Memory Card International Association
Programming device
Programmable Logic Control
Program test
Random-Access Memory (read and write)
Rapid Override: input correction
R Parameter Active: Identifier for R-parameters
Request To Send: switch on transmitter, control signal from serial data
interfaces
Single Block
Setting Data Active
Setting data
Soft key
Skip: hide block
Synchronous Linear Motor
Sub Program File
Static RAM (buffered)
Leadscrew error compensation
Software limit switch
Testing Data Active: identifier for machine data
NST
NV
OB
OPI
P-BUS
PCMCIA
PG
PLC
PRT
RAM
ROV
RPA
RTS
SBL
SEA
SD
SK
SKP
SLM
SPF
SRAM
SSFK
SW limit switch
TEA
Abbreviations
To Next Page
Loading...
