NOTE
For your own safety, observe the warnings and safety instructions contained in this document, if available.
Disclaimer of Liability
We have checked the text of this manual for conformity
with the hardware and software described. However, since
deviations cannot be ruled out entirely, we do not accept
liability for complete conformity or for any any errors or
omissions.
The information given in this document is reviewed regu-
larly and any necessary corrections will be included in
subsequent editions. We appreciate any suggestions for
improvement.
We reserve the right to make technical improvements
without notice.
Document Version 4.04.00
Release date 09.2016
Copyright
Copyright
©
Siemens AG 2016. All rights reserved.
The reproduction, transmission or use of this document or
its contents is not permitted without express written
authority. Offenders will be liable for damages. All rights
reserved, particularly for the purposes of patent application
or trademark registration.
Registered Trademarks
SIPROTEC, SINAUT, SICAM and DIGSI are registered trade-
marks of SIEMENS AG. Other designations in this manual
might be trademarks whose use by third parties for their
own purposes would infringe the rights of the owner.
To Next Page
Loading...
Need help?
General
