Default Settings and Protocol-dependent Functions
When the device leaves the factory, a large number of LED indicators, binary inputs and outputs as well as
function keys are already preset. They are summarized in the following tables.
E.1 Default Settings LEDs 530
E.2 Default Settings Binary Inputs 531
E.3 Default Settings Binary Outputs 532
E.4 Default Settings Function Keys 533
E.5 Default Display 534
E.6 Pre-defined CFC Charts 536
E.7 Protocol-dependent Functions 537
E
SIPROTEC 4, 7UT6x, Manual 529
C53000-G1176-C230-5, Edition 09.2016
To Next Page
Loading...
