Control During Operation
7-10 7SA6 Manual
C53000-G1176-C133-1
Figure 7-10 Example of earth fault messages in the front display
Use the and keys to move up and down in the fault messages.
Use the key to move back into the ($57+)$8/70(66$*(6 level; or press the
key to go back to the 0$,10(18.
From PC with
DIGSI
®
4
Click on $QQXQFLDWLRQ. The options appear in the data window (see Figure 7-2).
Double click on the desired message group in the data window, in this case the ($57+
)$8/70(66$*(6. A list of the earth fault logs appears in the data window, as shown
in Figure 7-11.
By double clicking on an entry in the list view, the associated contents of the network
fault is displayed in another window. The entries are chronologically listed with the
newest message appearing first.
Figure 7-11 DIGSI
®
4 Selection of Earth Fault Log with a Fault Indicated in the Data Window
Figure 7-12 DIGSI
®
4 Example of Indications for Earth Fault, Earth Fault Log
($57+)$8/70(66$*(
!/DVW)DXOW²!
!QG/DVW)DXOW²!
etc
/$67)$8/7
!
(DUWK)DXOW21
MENU
:
To Next Page
Loading...
Need help?
General