Appendix
B-22
B.2 List of Information
F.No. Description Function Type of
Information
Log-Buffers Configurable in Matrix IEC 60870-5-103
Event Log On/Off
Trip (Fault) Log On/Off
Ground Fault Log On/Off
Marked in Oscill. Record
LED
Binary Input
Function Key
Binary Output
Chatter Blocking
Type
Information-No
Data Unit (ASDU)
General Interrogation
3 >Synchronize Internal Real Time
Clock (>Time Synch)
Device SP * * LED BI BO
4 >Trigger Waveform Capture
(>Trig.Wave.Cap.)
Oscillographic
Fault Records
SP ON * M LED BI BO
5 >Reset LED (>Reset LED) Device SP * * LED BI BO
7 >Setting Group Select Bit 0 (>Set
Group Bit0)
Change Group SP * * LED BI BO
8 >Setting Group Select Bit 1 (>Set
Group Bit1)
Change Group SP * * LED BI BO
15 >Test mode (>Test mode) Device SP ON
OFF
* LED BI BO 135 53 1 GI
16 >Stop data transmission (>DataS-
top)
Device SP * * LED BI BO 135 54 1 GI
51 Device is Operational and Protecting
(Device OK)
Device OUT ON
OFF
* LED BO 135 81 1 GI
52 At Least 1 Protection Funct. is Active
(ProtActive)
Device IntSP ON
OFF
* LED BO 128 18 1 GI
55 Reset Device (Reset Device) Device OUT * * LED BO 128 4 1
56 Initial Start of Device (Initial Start) Device OUT ON * LED BO 128 5 1
60 Reset LED (Reset LED) Device OUT_Ev ON * LED BO 128 19 1
67 Resume (Resume) Device OUT ON * LED BO 135 97 1
68 Clock Synchronization Error (Clock
SyncError)
Device OUT ON
OFF
* LED BO
69 Daylight Saving Time (DayLightSav-
Time)
Device OUT ON
OFF
* LED BO
70 Setting calculation is running (Set-
tings Calc.)
Device OUT ON
OFF
* LED BO 128 22 1 GI
71 Settings Check (Settings Check) Device OUT * * LED BO
72 Level-2 change (Level-2 change) Device OUT ON
OFF
* LED BO
73 Local setting change (Local change) Device OUT * *
110 Event lost (Event Lost) Device OUT_Ev ON * LED BO 135 130 1
113 Flag Lost (Flag Lost) Device OUT ON * M LED BO 135 136 1 GI
125 Chatter ON (Chatter ON) Device OUT ON
OFF
* LED BO 135 145 1 GI
126 Protection ON/OFF (via system port)
(ProtON/OFF)
Device IntSP ON
OFF
* LED BO
127 Auto Reclose ON/OFF (via system
port) (AR ON/OFF)
Device IntSP ON
OFF
* LED BO
128 Teleprot. ON/OFF (via system port)
(TelepONoff)
Device IntSP ON
OFF
* LED BO
To Next Page
Loading...
Need help?
General