Siemens siprotec 7SA6 User Manual

Index-i7SA6 Manual
C53000-G1176-C133-1
Index
Numerics
1st Reclosure Cycle ........................... 6-188
2 Protection Equipments
with 2 Automatic Reclosure Functions
.................................................... 6-182
2nd to 4th Reclosure Cycle ................ 6-189
5th to 8th Reclosure Cycles ............... 6-190
A
Accessories ........................................... A-9
Graphic Tools ................................ A-10
Mounting Rail for 19"-Racks ............ A-9
Acknowledgement of
Commands to local/remote/Digsi 6-300
Commands to the Device Front ... 6-300
Action Times ...................................... 6-169
Adaptive Dead Time (ADT) .... 6-176, 6-187
Additional Logic ................................... 5-45
Additional Settings ................................. 6-6
Alternating Voltage .............................. 10-3
Ambient Temperatures ...................... 10-10
Analog Inputs ............................... 1-2, 10-2
Analog Output ...................................... 8-34
Analog Outputs ...................... 6-249, 10-39
Angle Error Compensation ................ 6-164
Annunciation
due to Missing Synchronization ..... 5-58
Applications ........................................... 1-5
Applying the Function Parameter Settings
..................................................... 6-131
Automatic Reclosure ............................ 1-10
Automatic Reclosure Interlocking ...... 6-277
Auxiliary and Reference Voltages ...... 6-254
B
Battery ................................................... A-9
Binary Inputs ........................................ 10-3
Binary Inputs and Outputs . 1-3, 8-10, 10-3
Binary Outputs ............................. 7-3, 10-4
Binary Outputs for Switching Devices .. 5-28
Blocking ............................................. 6-109
Blocking Scheme ............. 6-89, 8-60, 8-63
Breaker Failure Protection ................. 6-239
Breaker Tripping Alarm Suppression . 6-278
Broken Conductor .............................. 6-257
Buffer Battery ..................................... 6-254
C
Calculation of the Impedances
Applying the Function Parameter Settings
.......................................... 6-48
Method of Operation ...................... 6-41
Certifications ...................................... 10-11
CFC ............................................ 4-16, 4-24
Changeover of Setting Groups ............. 7-36
Changing
the Hardware Conditions ............... 8-44
the Synchronization Mode ............. 5-58
the Time ......................................... 7-32
Characteristics ................................... 10-16
........... of the Directional Measurement 6-57
Check Sequence ................................ 6-296
Checking Analog Outputs .................... 8-45
Checking System Connections ............ 8-38
Checking the Binary Inputs and Outputs
........................................................ 8-43
Circuit Breaker Failure Protection ........ 1-11
Circuit Breaker for Voltage Transformers
...................................................... 6-265
Circuit Breaker not operational .......... 6-237,
6-242
Circuit Breaker Pole
Discrepancy Supervision ............. 6-239
Circuit Breaker Status .......................... 6-21
Circuit Breaker Test ............................. 6-11
Circuit Breaker Test Function ............... 7-41
Circuit Breaker Trip Test .................... 6-281
Circuit-Breaker for Voltage Transformers
.......................................................... A-9
Climatic Stress Tests ......................... 10-10
Close command–transfer (Remote–CLOSE)
..................................................... 6-177
Closing at
Asynchronous System Conditions
...................................................... 6-200
Ssynchronous System Conditions 6-199

Siemens siprotec 7SA6 Specifications

General

Brand	Siemens
Model	siprotec 7SA6
Category	Relays
Language	English