Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
43
Important notes
Transport
Risk of death due to improper transport of the device
The device can tip over if you transport it incorrectly or if you use non-approved transport
equipment. Death, serious injury, and property damage can result.
• Ensure that only trained personnel transport the device with approved transport
equipment and lifting tools.
• Comply with the information regarding the center of gravity. A label or stamp with exact
information regarding the center of gravity of the cabinet is attached to each transport
unit.
• Transport the unit only in the original marked upright position. Do not tilt the device.
• The forks of the forklift must protrude at the rear of the transport pallet. The floor panels
of the transport units do not support loading.
Risk of death due to use of non-approved forklifts
If the forks are too short, this can cause the transport unit/cabinet to tip over resulting in
death, serious injury, or damage to the cabinet.
• The forks of the forklift must protrude at the rear of the transport pallet. The floor panels
of the transport units do not support loading.
• Only use forklifts approved for this purpose to transport the units.
To Next Page
Loading...
Need help?
General