Options
8.22 K95, CU320-2 PN Control Unit
Cabinet Modules NEMA
436 Manual, 04/2014, A5E03586450A
Using the memory card
Description
The STARTER commissioning tool is used to store configuration data centrally on the
memory card. This ensures that the Control Unit can be simply replaced without the loss of
any data if it is defective. It also enables data to be stored on external storage media.
The data on a memory card can also be accessed using a card reader connected to a PC.
This card reader is not included in the product package.
System requirements for installing STARTER V4.4
Hardware
The following minimum requirements must be met:
● Programming unit (PG) or PC
● Pentium III, at least 1 GHz, (> 1 GHz recommended)
● 1 GB RAM (2 GB recommended)
● Screen resolution 1024 × 768 pixels, 16-bit color depth
● Free hard disk space > 3 GB
The following minimum requirements must be met when using STARTER without an existing
STEP-7 installation:
● Microsoft Internet Explorer V6.0 or higher
32-bit operating systems:
● Microsoft Windows Server 2003 SP2
● Microsoft Windows Server 2008
● Microsoft Windows XP Professional SP2
*)
and SP3
● Microsoft Windows 7 Professional incl. SP1
● Microsoft Windows 7 Ultimate incl. SP1
● Microsoft Windows 7 Enterprise incl. SP1 (Standard Installation)
64-bit operating systems:
● Microsoft Windows 7 Professional SP1
● Microsoft Windows 7 Ultimate SP1
● Microsoft Windows 7 Enterprise SP1 (Standard Installation)
● Microsoft Windows Server 2008 R2
*)
Restricted scope of testing
To Next Page
Loading...
Need help?
General