Options
8.53 Y11, factory assembly into transport units
Cabinet Modules NEMA
500 Manual, 04/2014, A5E03586450A
Y11, factory assembly into transport units
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize base cabinets
● Motor Modules in chassis format
● Auxiliary Power Supply Modules
Cabinet Modules can be ordered as factory-assembled transport units with a maximum width
of up to 94.5" (2400 mm). In this case, the relevant modules are shipped as interconnected
units (both electrically and mechanically).
Note
No additional wiring between the Ca
binet Modules is required, with the exception of the
-CLiQ connections used to interconnect the cabinets.
When transport units are used for delivery, a crane transport aid in the form of a transport rail
is already included.
Table 8- 65 Installation sequence of the transport unit
Plain text required to order
Consecutive number of the transport unit
Position of the Cabinet Module within the transport unit
To Next Page
Loading...
Need help?
General