Siemens SITRANS LUT400 - Page 249

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
247
recommend that you use SIMATIC PCS7 Asset Management Software in conjunction with
SIMATIC PDM.
To access these parameters via SIMATIC PDM:
● Open the menu Device – Maintenance and select the Remaining Device Lifetime tab.
(For more details see Maintenance in LUT400Communications manual
1
.)
Time Units
Allows you to set the desired units.
Options
2
HOURS
DAYS
*
YEARS
1)
Communications for SITRANS LUT400 (HART) Manual (7ML19985NE01)
2)
Units are selectable only via SIMATIC PDM, PACTware FDT, and AMS.
Lifetime Expected (3.3.3.1.)
Note
The device always operates in years. Changing the Time Units affects only the parameter
view of the Remaining Device Lifetime parameters in SIMATIC PDM, PACTware FDT, and
AMS.
Allows you to override the factory default.
Values
Units
1
: hours, days, years
Range: 0.000 to 20.000 years
Default: 10.000 years
1)
Units are selectable only via SIMATIC PDM, PACTware FDT, and AMS.
Time in Operation (3.3.3.2.)
Read only. The amount of time the device has been operating.
Remaining Lifetime (3.3.3.3.)
Read only. Lifetime Expected (3.3.3.1.) (Page 247) less Time in Operation (3.3.3.2.)
(Page 247).