STOBER 3 | General safety instructions
12/2018 | ID 442537.05
13
3 General safety instructions
There are risks associated with the product described in this documentation that can be
prevented by complying with the described warning and safety instructions as well as the
included technical rules and regulations.
3.1 Directives and standards
The following European directives and standards are relevant to the drive controllers:
§ Machinery Directive 2006/42/EC
§ Low Voltage Directive 2014/35/EU
§ EMC Directive 2014/30/EU
§ EN 61326-3-1:2008
§ EN 61800-3:2004 and A1:2012
§ EN 61800-5-1:2007
§ EN 61800-5-2:2007
§ EN 50178:1997
Subsequent references to the standards do not specify the respective year in order to improve
readability.
3.2 Qualified personnel
In order to be able to perform the tasks described in this documentation, the persons instructed
to perform them must have the appropriate professional qualification and be able to assess the
risks and residual hazards when handling the products. For this reason, all work on the products
as well as their operation and disposal may be performed only by professionally qualified
personnel.
Qualified personal are persons who have acquired authorization to perform these tasks either
through training to become a specialist and/or instruction by specialists.
Furthermore, valid regulations, legal requirements, applicable basic rules, this documentation
and the safety instructions included in it must be carefully read, understood and observed.
To Next Page
Loading...
Need help?
General
