Stober SD6 Series User Manual

STOBER 5 | Technical data
12/2018 | ID 442537.05
31
5.1.8 Weight
Size Weight without packaging [g] Weight with packaging [g]
Size 0 2530 3520
Size 1 3700 5470
Size 2 5050 6490
Size 3 13300 14800
Tab. 31: Weight of SD6 [g]
If you intend to order the drive controller with accessory parts, the weight increases as follows.
Accessories Weight without packaging [g]
Communication module 50
Terminal module 135
Safety module 100
Tab. 32: Weight of the accessory part [g]
Weight specifications for other optional accessories can be found in the technical data of the
respective accessory part.
5.2 DC link connection
The following chapter includes information on the design, dimensions and weight of DL6A Quick
DC-Link modules.
5.2.1 General technical data
The following information applies to all Quick DC-Link modules and corresponds to the general
technical data for the base device.
Device features
Protection class of the device IP20
Protection class of the installation
space
At least IP54
Tab. 33: Device features
Transport and storage conditions
Storage/
transport temperature
−20°C to +70°C
Maximum change: 20K/h
Relative humidity Maximum relative humidity 85%, non-condensing
Vibration (transport) in accordance
with DIN EN60068-2-6
5Hz ≤ f ≤ 9Hz: 3.5mm
9Hz ≤ f ≤ 200Hz: 10m/s²
200Hz ≤ f ≤ 500Hz: 15m/s²
Tab. 34: Transport and storage conditions

Stober SD6 Series Specifications

General

Brand	Stober
Model	SD6 Series
Category	Controller
Language	English