Black plate (147,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
Inside warning
chime
Outside warning
chime
Access key
warning light on
meter
Operation indi-
cator on push-
button ignition
switch
Status Action
Ding —
(Flashes 1 sec.
intermittent)
—
The vehicle was driven while the
access key is not inside the vehicle.
Always carry the access key while
driving the vehicle.
Ding —
(Flashes 1 sec.
intermittent)
—
The push-button ignition switch was
pressed while the access key is not
inside the vehicle.
Carry the access key, and press the
push-button ignition switch.
Ding
Beep, beep,
beep (3 times)
(Flashes 1 sec.
intermittent)
—
The driver exited the vehicle with
the access key and closed the
driver’s door while the push-button
ignition switch is in a position other
than “OFF” (in AT models, when the
select lever is in the “P” position).
Switch the push-button ignition
switch to “OFF”, and get out of the
vehicle.
Ding
Beep, beep,
beep (3 times)
(Flashes 1 sec.
intermittent)
—
A fellow passenger exited the ve-
hicle with the access key and
closed a door other than the driver’s
door while the push-button ignition
switch is in a position other than
“OFF”.
Return the access key to the inside
of the vehicle, or switch the push-
button ignition switch to “OFF”.
Long beep
(continuous)
Long beep
(continuous)
(Flashes 1 sec.
intermittent)
—
The driver exited the vehicle with
the access key and closed the
driver’s door while the push-button
ignition switch is in a position other
than “OFF” and the select lever is in
a position other than the “P” posi-
tion.
Shift the select lever to the “P”
position, switch the push-button
ignition switch to “OFF” and exit the
vehicle.
Instruments and controls
3-29
– CONTINUED –
3
To Next Page
Loading...
