Subaru FORESTER 2012 - Page 223

Black plate (231,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
6. Say t he name (voice tag) to be
registered.
7. Select the “CONFIRM” menu. Then
“STORED” is displayed and the mode
changes to the registering speed dial
mode. Refer to “
s05be051107Registering speed
dial” F5-45.
! Registering speed dial
S05BE051107
1. After registering phonebook data, se-
lect the “SPEED DIAL” menu.
2. Press the preset button (from
to
) to which you want to register the
phone number.
NOTE
If the number to be used is already
registered in speed dial, “ OVER-
WRITE?” will be displayed.
! List names function
S05BE051108
The voice tags registered in the phone-
book are spoken by using the list names
function. To use the list names function,
perform the following procedure.
1. Select the “LIST NAMES” menu.
2. Choose the registered data by press-
ing the talk switch
or by operating the
“TUNE/TRACK” dial. Then “SELECTED”
is displayed. You can choose the following
menus.
. “DIAL” to make a phone call
. “CHANGE NAME” to change the name
(voice tag)
. “SET SPD DIAL”/“SET SPEED DIAL”
to set the speed dial
. “DELETE ENTRY” to delete the name
(voice tag) from the phonebook
. “GO BACK” to go back to the menu
mode
NOTE
. After “LIST NAMES” is selected, if
the OFF hook switch
is pushed, the
selected number is called.
. After “LIST NAMES” is selected, if
no operation is performed, the mem-
ories are displayed and voice tags are
spoken. After all memories/voice tags
are displayed/spoken, “END OF LIST”
is displayed and the mode changes to
the “PHONE BOOK” menu mode.
! Changing voice tag
S05BE051109
1. Select the “CHANGE NAME” menu.
2. Select the phone number by perform-
ing either of the following procedures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM” menu (only
after saying the voice tag). Then t he
selected phone number/name is dis-
played.
4. Press the talk switch
.
5. Say the new voice tag.
6. Select the “CONFIRM” menu. Then
“CHANGED” is displayed.
! Set speed dial
S05BE051110
1. Select the “SET SPD DIAL”/“SET
SPEED DIAL” menu.
2. Select the phone number by perform-
ing either of the following procedures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM” menu (only
after saying the voice tag).
4. Press the preset button (from
to
) in which you want to register the
phone number.
! Deleting the phonebook data
S05BE051111
1. Select the “DELETE ENTRY” menu.
2. Select the phone number by perform-
ing either of the following procedures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM” menu. Then
“DELETED” is displayed and the selected
Audio 5-45
– CONTINUED –
5