Black plate (414,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
11-64 Maintenance and service
8. Put the case together by fitting the
mating part of the button side into the hook
on the key side.
9. Reinstall the screw on the transmitter
case.
! Type B
S11BK0202
1. Remove the screw on the transmitter
case.
2. Separate the case.
1) Negative (−) side facing up
3. Remove the old battery.
4. Fit a new battery (type CR-1620 3V or
equivalent) in the case with its negative
(−) side facing upward.
5. Put the case together by fitting the
mating part of the button side into the hook
on the key side.
6. Reinstall the screw on the transmitter
case.
To Next Page
Loading...
