Black plate (61,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
down i nto the seat cushion and then
tightening the seatbelt.
! Models with ALR
S01AG110204
1. Place the child restraint system in the
rear seating position.
2. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
manufacturer.
3. Insert the tongue plate into the buckle
until you hear a click.
4. Take up the slack in the lap belt.
5. Pull out the seatbelt fully from the
retractor to change the retractor over from
the Emergency Locking Retractor (ELR)
to the Automatic Locking Retractor (ALR)
function. Then, allow the belt to rewind
into the retractor. As the belt is rewinding,
clicks will be heard which indicate the
retractor functions as ALR.
6. Before having a child sit in the child
restraint system, try to move it back and
forth and right and left to check that it is
firmly secured. Sometimes a child restraint
can be more firmly secured by pushing it
down into the seat cushion and then
tightening the seatbelt.
7. Pull at the shoulder portion of the belt
to confirm that it cannot be pulled out (ALR
properly functioning).
Seat, seatbelt and SRS airbags 1-31
– CONTINUED –
1
To Next Page
Loading...
