Black plate (101,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
the door handle or by pressing the rear
gate opener button.
. If any of the doors or the rear gate is
open, the doors and the rear gate
cannot be locked.
. When locking, be sure to carry the
access key to prevent locking the
access key in the vehicle.
! Unlocking
S02AP010201
Carry the access key, and grip the door
handle.
Models without double locking system:
All doors including the rear gate will be
unlocked. Also, t he hazard warn ing
flashers will flash twice.
Models with double locking system:
Only the door for which the door handle is
gripped will be unlocked. Also, the hazard
warning flashers will flash twice.
For details about the factory setting
(default setting), refer to “
s00afFunction set-
tings” F27. For further details, we recom-
mend that you consult a SUBARU dealer.
! Opening rear gate
S02AP010210
1) Rear gate opener button
Carry the access key, and press the rear
gate opener button.
Models without double locking system:
The rear gate and all doors will be
unlocked, and the rear gate will be
opened. Also, the hazard warning flashers
will flash twice.
Models with double locking system:
Only the rear gate will be unlocked and
opened. Also, the hazard warning flashers
will flash twice.
For details about the factory setting
(default setting), refer to “
s00afFunction set-
tings” F27. For further details, we recom-
mend that you consult a SUBARU dealer.
! Locking with the door lock button
S02AP010214
1) Door lock button
Carry the access key, close all doors
including the rear gate and press the door
lock button on the door handle. All doors
including the rear gate will be locked. Also,
the hazard warning flashers will flash
once.
For details about the factory setting
(default setting), refer to “
s00afFunction set-
tings” F27. For further details, we recom-
mend that you consult a SUBARU dealer.
Keys and doors 2-13
– CONTINUED –
2
To Next Page
Loading...
