Supermicro SSE-F3548S - Page 108

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
108
SMIS(config-if)# switchport mode trunk
SMIS(config-if)# switchport trunk native vlan 10
SMIS(config-if)# exit
# Configure VLANs for port fx 0/41
SMIS(config)# int fx 0/41
SMIS(config-if)# switchport mode trunk
SMIS(config-if)# exit
# Configure the access VLAN for ports fx 0/20 to fx 0/40
SMIS(config)# interface range fx 0/20-40
SMIS(config-if)# switchport mode access
SMIS(config-if)# switchport access vlan 10
SMIS(config-if)# exit
# Configure the port channel trunk interface on fx 0/15 and fx 0/16
SMIS(config)# interface port-channel 1
SMIS(config-if)# exit
SMIS(config)# interface range fx 0/15-16
SMIS(config-if)# channel-group 1 mode on
SMIS(config-if)# exit
SMIS(config)# interface port-channel 1
SMIS(config-if)# switchport mode trunk
SMIS(config-if)# switchport trunk native vlan 10
SMIS(config-if)# end
# Check the running-configuration for accuracy
SMIS# show runnning-config
Building configuration...
ID Hardware Version Firmware OS Boot Loader
0 SSE-F3548 1.0.0.0 6 0.0.0.0
ip address 172.31.30.120
interface port-channel 1
exit
# Vlans and hybrid mode member ports configurations
vlan 1
ports fx 0/11-14 untagged
ports fx 0/17-19 untagged
ports fx 0/41-48 untagged