Supermicro SSE-F3548S - Topology 2 - Switch to Switch MLAG Topology

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
150
5.2.2 Topology 2 - Switch to Switch MLAG Topology
Figure MLAG-2
In Figure MLAG-2, Switch A and Switch B are peer switches in the MLAG. Switches A and B are connected
through an IPL port channel interface.
Switch C is connected to both MLAG peer switches through a regular LACP port channel interface.
On the Switch A and Switch B sides, the ports connected to Switch C are configured with the same MLAG
enabled port channel number.
Switch A
Switch B
MLAG Port Channel
Switch C
LACP PO
IPL - PO