Supermicro SSE-F3548S - 2.2 Management Access

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
18
2.2 Management Access
Supermicro switches enable access control of the switch by various mechanisms:
• User name and password
• Enable password
• Authorized Managers
Defaults – Management Access
Parameter
Default Value
User Name/Password/Privilege
ADMIN/ADMIN/15
1
Privilege (For configured users)
1
Enable Password
ADMIN
IP Authorized Managers
None
2.2.1 User Login
User accounts can be configured for switch access. Each username can be associated with a password and
privilege level. Users configured with a password are authenticated while accessing the switch to the
configured privilege level.
Users with privilege level 1 or above can execute all “show” commands. To execute configuration
commands, access with privilege level 15 is required.
Follow the steps below to configure the username.
Step
Command
Description
Step 1
configure terminal
Enters the configuration mode
Step 2
username <user-name> [password <passwd>]
[privilege <1-15>]
Configure username and password.
user-name–Alphanumeric characters of
length 1-20
password – Alphanumeric characters of
length 1-20
privilege - Specify 1-15, any of the
privilege levels
Step 3
End
Exits the configuration mode.
Step 4
list users
show users
Displays the users available in the
switch.
Displays users that are currently logged
in.