Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
5.2 Topologies
5.2.1 Topology 1 - Server to Switch MLAG Topology
Figure MLAG1
In Figure MLAG-1, Switch A and Switch B are peer switches in the MLAG. Switches A and B are connected
through an IPL port channel interface.
The server is connected to both MLAG peer switches either through regular bonding or by a teaming LACP
interface on the server side.
On the switch side, the ports connected to the server are configured with the same MLAG enabled port
channel number.
Bonding / Teaming
MLAG Port Channel
IPL - PO
Switch B
Switch A
To Next Page
Loading...
