Supermicro SSE-F3548S - TACACS Privilege

339 |341
Timeout : 5
Key Type : 0
Secret Key : test123
Mode : Pap
Client uses server: 192.168.2.11
Authorization Enable
Authen. Starts sent
: 8
Authen. Continues sent : 0
Authen. Enables sent
: 0
Authen. Aborts sent
: 0
Authen. Pass rvcd.
: 5
Authen. Fails rcvd.
: 3
Authen. Get User rcvd. : 0
Authen. Get Pass rcvd. : 0
Authen. Sess. timeouts
: 0
Author. Requests sent
: 4
Author. Pass Add rcvd. : 0
Author. Pass Repl rcvd :
0
Author. Fails rcvd.
:
0
Author. Errors rcvd.
: 0
Author Follows rcvd.
: 0
Author. Sess. timeouts
: 0
Acct. start reqs. sent
: 0
Acct. WD reqs. sent
: 0
Acct. Stop reqs. sent
: 0
Acct. Success rcvd. : 0
Acct. Errors rcvd.
: 0
Acct. Follows rcvd.
: 0
Acct. Sess. timeouts
: 0
Malformed Pkts. rcvd. : 0
Socket failures
: 0
Connection failures
: 0
13.3.6 TACACS Privilege
Req. #
Description
Comments
1.0
The privilege configured in TACACS+ server should
be used while logging in to Supermicro switch
using TACACS+ authentication.
There are many types of service used by different
vendors on the market. For Supermicro switches
the supported service type is ‘config’.
E.g. user configuration in TACACS+ server:
user = test15 {
name = "Test15 User"
pap = cleartext "test15"
service=config {
priv-lvl = 15
This is an umbrella requirement
to cover the functionality.