Supermicro SSE-F3548S - 11.5 Enable;Disable the SNMP Agent

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
279
Communities
PUBLIC,
NETMAN
Users
initial,
TemplateMD5,
TemplateSHA
Authentication
(for default users)
initial : none
TemplateMD5: MD5
TemplateSHA: SHA
Privacy
(for default users)
initial : none
TemplateMD5: none
TemplateSHA: DES
Groups
iso,
initial
Access
iso,
initial
View (for default groups)
iso: iso,
initial: restricted
Notify View Name
iss,
iss1
Read, Write, Notify
Iso
Target Parameters
Internet,
test1
Storage Type
Volatile
Context
None
SNMP Port
161
SNMP Trap Port
162
Trap Status
Enabled
Authentication Trap
Disabled
Link-State Trap
Enabled
Switch Name
SMIS
System Contact
http://www.supermicro.com
System Location
Supermicro
11.5 Enable/Disablethe SNMP Agent
The SNMP Agent is enabled by default in Supermicro switches.
Follow the steps below to disable the SNMP agent.
Step
Command
Description
Step 1
configure terminal
Enters the configuration mode
Step 2
disable snmpagent
Disables the SNMP agent
Step 3
end
Exits the configuration mode.
Step 4
write startup-config
Optional step – saves this SNMP