Supermicro SSE-F3548S - TACACS Login Authentication Mode

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
335
Server : 2
Address : 50.50.50.1
Single Connection : no
TCP port : 49
Timeout : 5
Secret Key : key789
Client uses server: 10.10.10.1
Authen. Starts sent : 0
Authen. Continues sent : 0
Authen. Enables sent : 0
Authen. Aborts sent : 0
Authen. Pass rvcd. : 0
Authen. Fails rcvd. : 0
Authen. Get User rcvd. : 0
Authen. Get Pass rcvd. : 0
Authen. Get Data rcvd. : 0
Authen. Errors rcvd. : 0
Authen. Follows rcvd. : 0
Authen. Restart rcvd. : 0
Authen. Sess. timeouts : 0
Author. Requests sent : 0
Author. Pass Add rcvd. : 0
Author. Pass Repl rcvd : 0
Author. Fails rcvd. : 0
Author. Errors rcvd. : 0
Author Follows rcvd. : 0
Author. Sess. timeouts : 0
Acct. start reqs. sent : 0
Acct. WD reqs. sent : 0
Acct. Stop reqs. sent : 0
Acct. Success rcvd. : 0
Acct. Errors rcvd. : 0
Acct. Follows rcvd. : 0
Acct. Sess. timeouts : 0
Malformed Pkts. rcvd. : 0
Socket failures : 0
Connection failures : 0
13.3.4 TACACS Login Authentication Mode
Supermicro switches provide an option to configure TACACS login authentication mode. Users
can specify one of the mode PAP or CHAP .
In TACACS+ mode, authentication request is sent to the configured TACACS+ server. The
user name and passwords are authenticated using TACACS+ server.
Follow the steps below to configure the TACACS login authentication mode to be used.