Supermicro SSE-F3548S - Negotiation

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
25
Fx0/38 up down
Fx0/39 up down
Fx0/40 up down
Fx0/41 up down
Fx0/42 up down
Fx0/43 up down
Fx0/44 up down
Fx0/45 up down
Fx0/46 up down
Fx0/47 up down
Fx0/48 up down
Cx0/1 up down
Cx0/2 up down
Cx0/3 up down
Cx0/4 up down
Cx0/5 up down
Cx0/6 up down
po1 up down
po6 up down
2.3.2 Negotiation
Interface speed can be negotiated between connected devices, if both ends support negotiation.
Auto negotiation is disabed by default for all the ports. It can be enabled for 100G CX ports.
Follow the steps below to configure Interface Negotiation.
Step
Command
Description
Step 1
configure terminal
Enters the configuration mode
Step 2
interface <interface-type><interface-id>
or
interface range <interface-type><interface-id> ….
Enters the interface configuration
mode.
interface-type – may be any of the
following:
cx-ethernet