Supermicro SSE-F3548S - 12.2.4 RMON Configuration Example

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
319
owner - Optional field that allows you
to enter the name of the owner of the
RMON group of statistics with a string
length of 127
Step 4
rmon collection history <index (1-65535)> [buckets
<bucket-number (1-65535)>] [interval <seconds (1-
3600)>] [owner <ownername (127)>]
(Optional) Enable history collection for
the specified number of buckets and
time period
index - History table index, in range 1-
65535
buckets - The maximum number of
buckets desired for the RMON
collection history group of statistics.
interval - The number of seconds in
each polling cycle, in range 1-3600
owner - Optional field - allows the user
to enter the name of the owner of the
RMON group of statistics, string of
length 127.
Step 5
show rmon [statistics [<stats-index (1-65535)>]]
[alarms] [events] [history [history-index (1-65535)]
[overview]]
Display RMON statistics, history and
overview.
The “no rmon collection stats <index (1-65535)>” and “no rmon collection history <index (1-
65535)>” commands delete the RMON collection configuration.
12.2.4 RMON Configuration Example
A sample RMON configuration of alarms, events and collection statistics and History in a Supermicro
switch is specified below.
1) Enable RMON
2) Create events for Rising and falling threshold.
3) Create the alarm for the MIB object in 1 1.3.6.1.6.3.16.1.2.1.4table.
4) Create statistics collection on an interface.
5) Display all RMON configurations.
SMIS# configure terminal
SMIS(config)# set rmon enable
SMIS(config)# rmon event 1 description rise log owner smicro1 trap PUBLIC
SMIS(config)# rmon event 2description fall log owner smicro1 trap NETMAN