Supermicro SSE-F3548S - Page 146

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
146
Ports in the Group
------------------
Port: Fx0/1
-------------
Port State = Down, Not in Bundle
Channel Group: 3
Mode: Active
Pseudo port-channel = Po3
LACP port-priority = 128
LACP Wait-time = 2 secs
LACP Activity: Active
LACP Timeout: Long
Aggregation State: Aggregation, Defaulted
Port: Fx0/2
-------------
Port State = Down, Not in Bundle
Channel Group: 3
Mode: Active
Pseudo port-channel = Po3
LACP port-priority = 128
LACP Wait-time = 2 secs
LACP Activity: Active
LACP Timeout: Long
Aggregation State: Aggregation, Defaulted
LACP Port Admin Oper Port Port Port State Priority Key Key Number State
---------------------------------------------------------------------
Fx0/1
Down
128
3
3
0x31
0x45
Fx0/2
Down
128
3
3
0x32
0x45
Port-channel: Po3
-------------------
Number of Ports = 2
HotStandBy port = null
Port state = Port-channel Ag-Not-Inuse
Protocol = LACP
Default Port = None
SMIS#
# Save this port channel configuration. SMIS# write startup-config
Building configuration, please wait. May take a few minutes . . .
[OK]
SMIS#