Supermicro SSE-F3548S - Page 250

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
250
ACL 1 Configuration
This ACL has two rules: one to allow traffic from 172.20.20.1 and the other is to deny all traffic from the
172.20.0.0 network.
Create the permit rule first.
SMIS# configure terminal
SMIS(config)# ip access-list extended acl_1a
SMIS(config-ext-nacl)# permit tcp 172.20.0.0 255.255.0.0 any eq 25
Then create the deny rule for the subnet 172.20.0.0.
SMIS# configure terminal
SMIS(config)# ip access-list extended acl_1b
SMIS(config-ext-nacl)# deny tcp 172.20.0.0 255.255.0.0 any
ACL 2 Configuration
SMIS# configure terminal
SMIS(config)# ip access-list extended 100
SMIS(config-ext-nacl)# redirect fx 0/1 icmp any 172.10.0.0 255.255.0.0
ACL 3 Configuration
SMIS# configure terminal
SMIS(config)# ip access-list extended 200
SMIS(config-ext-nacl)# deny udp any 172.100.0.0 255.255.0.0 eq 1000
172.100.0.0
Network
Server A
172.10.10.10
Gateway
172.100.0.1
Fx 0/10
172.20.0.0
Network
Switch
Fx 0/1