Supermicro SSE-F3548S - Page 264

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
264
Policy Map 1 is active
Class Map: 1
-------------
Out Profile Entry
-----------------
Metering on
burst bytes/token size : 6
Refresh count : 500000
Out profile action : policed-dscp 10
SMIS# show class-map
DiffServ Configurations:
------------------------
Class map 1
--------------
Filter ID : 1
Filter Type : IP-FILTER
SMIS# show running-config
Building configuration...
ID Hardware Version Firmware OS Boot Loader
0 SSE-F3548 1.0.0.0 6 0.0.0.0
vlan 1
ports fx 0/1-24 untagged
ports cx 0/1-3 untagged
exit
ip access-list standard 1
permit 20.1.0.0 255.255.0.0 any
exit