Supermicro SSE-F3548S - Page 283

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
283
location name – Location of the switch
specified as a string with a maximum
size of 256.
Step 3
End
Exits the configuration mode.
Step 4
show system information
Displays the system information
configuration.
Step 5
write startup-config
Optional step – saves this configuration
to be part of the startup configuration.
The System Location configuration is automatically stored as part of the startup
configuration file.
The example below shows the commands used to configure system location.
SMIS# configure terminal
SMIS(config)# system location "Santa Clara"
SMIS(config)# end
SMIS# show system information
Switch Name: SMIS
Switch Base MAC Address: 00:30:48:e3:70:bc
SNMP EngineID: 80.00.08.1c.04.46.53
System Contact: http://www.supermicro.com
System Location: Santa Clara
Logging Option: Console Logging
Login Authentication Mode: Local
Snoop Forward Mode: MAC based
Config Restore Status: Not Initiated
Config Restore Option: No restore
Config Restore Filename: iss.conf
Config Save IP Address: 0.0.0.0
Supermicro L2/L3 Switches Configuration Guide 43
Device Up Time: 0 days 0 hrs 51 mins 39 secs
Boot-up Flash Area: Normal
NTP Broadcast Mode: No
[NTP] ntp is disabled
Server Key Prefer
=============== ===== ======
Key # Key
======= ====================================
Time zone offset not set