Supermicro SSE-F3548S - Page 305

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
305
b. Access for generalusers- full read,notify privilege to the ‘full’ view and , retricted write
5) Display all configuration
SMIS# configure terminal
SMIS(config)# snmp user user1 auth md5 pwd1
SMIS(config)# snmp user user2 auth sha abcd priv deS 1b12
SMIS(config)# snmp group superuser user user1 security-model v3 volatile
SMIS(config)# snmp group generalusers user user2 security-model v3 volatile
SMIS(config)# snmp view full 1.3.6.1 included volatile
SMIS(config)# snmp view restricted 1.3.6.1 included volatile
SMIS(config)# snmp view restricted 1.3.6.3.10.2.1 excluded volatile
SMIS(config)# snmp access superuser v3 auth read full write full notify full
SMIS(config)# snmp access generalusers v3 noauth read full write restricted notify full
SMIS(config)# end
SMIS# show snmp user
Engine ID : 80.00.08.1c.04.46.53
User : user1
Authentication Protocol : MD5
Privacy Protocol : None
Storage Type : Volatile
Row Status : Active
------------------------------
Engine ID : 80.00.08.1c.04.46.53
User : user2
Authentication Protocol : SHA
Privacy Protocol : DES_CBC