Suzuki RM250 - Clutch Spring; Clutch Push Rod and Push Piece; Primary Driven Gear and Clutch Sleeve Hub; Bearing and Spacer

7-6 CLUTCH
CLUTCH SPRING
• Measure the clutch spring free length.
 Clutch spring free length
Service limit: 49.4 mm (1.94 in)
 09900-20101: Vernier calipers
NOTE:
Replace six clutch springs together even if only one spring is
beyond the service limit.
CLUTCH PUSH ROD AND PUSH PIECE
• Inspect the clutch push rod for abnormal deflection, cracks
and damage.
• Inspect the clutch push piece for cracks, wear and damage.
• Inspect the bearing for abnormal noise, wear and damage.
PRIMARY DRIVEN GEAR AND
CLUTCH SLEEVE HUB
• Inspect the clutch sleeve hub and primary driven gear assem-
bly for abnormal wear, cracks and damage.
BEARING AND SPACER
• Inspect the spacer for wear and damage.
• Inspect the needle bearing for abnormal noise, wear and
damage.
CLUTCH RELEASE CAMSHAFT
• Inspect the clutch release camshaft for abnormal deflection
and damage.