Suzuki RM250 - Brake Fluid Air Bleeding

FRONT AND REAR BRAKES 15-5
BRAKE FLUID AIR BLEEDING
• Connect a transparent tube to the air bleeder valve and set
the other end into a receptacle.
• Pour brake fluid up to the UPPER line.
 Specification and classification: DOT 4
• Pump the brake lever (pedal) several times.
• Hold the brake lever (pedal) in squeezing position then open
the air bleeder valve.
• Close the air bleeder valve and release the brake lever
(pedal).
NOTE:
* Do not release the brake lever (pedal) while the air bleeder
valve is opened.
* Replenish brake fluid up to the UPPER line before the brake
fluid level drops below LOWER line.
• Repeat this sequence until air bubble is no longer squeezed
out from the brake system.
• Tighten the air bleeder valve.
 Air bleeder valve: 6 N·m (0.6 kgf-m, 4.4 lb-ft)
• Pour brake fluid up to the UPPER line.