Suzuki RM250 - Engine Mounting Procedure

5-8 ENGINE REMOVAL AND INSTALLATION
ENGINE MOUNTING
Reassemble the removed parts in the reverse order of removal. Pay attention to the following points:
• Mount the engine from the right side.
• Tighten the engine mounting bolts/nuts to the specified torque.
NOTE:
Replace the self-locking nuts with new ones.
N·m kgf-m lb-ft
1 2 43 4.3 31.0
3 4 45 4.5 32.5
5 55 5.5 40.0
6 70 7.0 50.5
Bolt Length
A 45 mm (1.8 in)
B 55 mm (2.2 in)
C 48 mm (1.9 in)
D 105 mm (4.1 in)
E 125 mm (4.6 in)