10-14 TRANSMISSION AND CRANKSHAFT
TRANSMISSION REASSEMBLY
Install the transmission in the reverse order of removal. Pay attention to the following points:
NOTE:
Seat the snap ring in the groove and locate its end as shown in
the illustration.
• Insert the driveshaft and countershaft with gears installed.
• Apply transmission oil to the following parts:
Driveshaft Countershaft
Transmission gears Bearings
Gearshift forks Gearshift shafts
Gearshift cam
• Install the gearshift cam and gearshift forks.
NOTE:
The shape of the gearshift fork for countershaft is different from
the others. (10-7)
• Apply MOLY PASTE to the 5th drive gear.
99000-25140: SUZUKI MOLY PASTE
Thrust
Sharp edge
To Next Page
Loading...
