Suzuki RM250 - Rear Shock Absorber Service

17-2 REAR SUSPENSION
REAR SHOCK ABSORBER
CONSTRUCTION
REMOVAL
• Place a block under chassis tubes.
• Remove the silencer and rear frame assembly. (4-17)
• Remove the rear shock absorber upper mounting bolt and
nut.
• Remove the rear shock absorber lower mounting bolt and nut.
• Remove the rear shock absorber.
NOTE:
If necessary, move the swingarm up or down to facilitate this
mounting bolt/nut removal.
55 N
.
m
(5.5 kgf-m,
40.0 lb-ft)
55 N
.
m
(5.5 kgf-m, 40.0 lb-ft)