16-16 FRONT FORK AND STEERING
INSTALLATION
• Install the front fork with the line T aligned with the upper sur-
face of the upper bracket.
• Check that the air valve A is positioned at the front.
• Tighten the fork lower clamp bolts to the specified torque.
Fork lower clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the fork upper clamp bolts to the specified torque.
Fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the fork cap bolt (sub-tank) to the specified torque.
09941-53630 : Front fork top cap wrench
Fork cap bolt: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
• Install the handlebars. (16-19)
• Install the front wheel. (14-5)
• Install the brake caliper. (15-10)
INSPECTION AFTER INSTALLATION
• Front fork (2-20)
• Steering (2-20)
• Wire, cable and hose routing (18-13, -14)
To Next Page
Loading...
