Suzuki RM250 - Inspection after Reassembly

8-6 KICK STARTER
• Install the clutch. (7-7, -8)
• Fit a new gasket 6 and dowel pins.
• Install the crankcase cover.
 Crankcase cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
• Install the kick starter lever.
 Kick starter lever bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the brake pedal. (5-9)
INSPECTION AFTER REASSEMBLY
After reinstalling the kick starter assembly, inspect the follow-
ings.
• Transmission oil level (2-9)
• Engine coolant level (2-11)
• Brake pedal height (2-20)