Suzuki RM250 - Front Fork Service

FRONT FORK AND STEERING 16-3
REMOVAL
• Place a block under the chassis tubes.
• Remove the front wheel. (14-3)
• Remove the handlebars. (16-18)
• Remove the fork protectors, brake hose guide and brake hose
clamp.
• Remove the front brake caliper. (15-8)
• Loosen the front fork cap bolt 1 – 2 turns to facilitate later dis-
assembly.
 09941-53630: Front fork top cap wrench
• Loosen the front fork upper clamp bolts 1.
• Hold the fork body and loosen the fork lower clamp bolts 2.
• Remove the front fork.