REAR SUSPENSION 17-5
• Apply grease to the needle roller bearings and install them.
• Apply grease to the dust seals and spacers.
• Install the spacers A and B.
A for right side
B for left side
99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
OIL REPLACEMENT
TOOLS AND EQUIPMENT
• Following tools and equipment are required to perform oil
replacement.
1 Screwdriver or small punch 7 Rags
2 Vise* 8 Nitrogen tank
3 Drain pan 9 Filler hose and nozzle
4 Oil can 0 Regulator assembly
5 Beaker A Owner’s service manual
6 Specified shock absorber oil
* Not Shown in the illustration
OIL REPLACEMENT PROCEDURE
• Remove the rear shock absorber unit from the frame (17-2),
clean and dry it.
• Remove the spring from the rear shock absorber unit.
(17-3)
NOTE:
Inspect the rear shock absorber unit for oil leakage.
Turn the rebound damping force adjuster screw counterclock-
wise until it stops so that the rear suspension oil can be poured
easily.
250
To Next Page
Loading...
